In this article, we at BestComfortBike will cover the most vital topic of the Best Bike Bell.
Is It Possible to Charge Scooter Battery without Charger? If you require understanding, then don’t trouble. Just read this article correctly. Here I will tell you How to Charge Scooter Battery without a Charger.
As we all comprehend that battery is a necessary thing for a scooter. But because of extreme use, the battery can be disabled. Then you have to replace the battery or buy a new one. So how do you charge a scooter at this time?
Here, in this article, I explained some system which can help you to Charge Scooter battery without a charger. So don’t be late. Let’s get excited.
Table of Contents
How to Charge a Scooter Battery without a Charger?
Common Steps
If you want Charge Scooter Battery without Charger at home, then you have to understand these basic steps –
1 Removing the Scooter Battery
Before charging your scooter first, you have to remove the battery. This alternative process produces a number of heat which produces the battery overheat. After reviewing the guideline, you can simply remove the battery.
2 Removing Screws
Inside your scooter, the battery is connected with a bolt and a plate hold. Just eliminate that screw and plate holder to make the battery.
3 Disconnect the battery
Then disconnect the battery by cut the negative and positive cable. These wires regularly connect with via slide-in hatches or clips. To withdraw any damage, you have to switch the connectors carefully.
4 Position the battery
Before adding it Portable Car Jumper or Variable Power Supply, you have to keep the battery in a dry place.
5 Using a portable car jumper
Transportable jumpers are the most common and proper suitable batteries for charging your scooter without a charger. Then the usual batteries, it can hold higher voltage. By using this system
You have to follow the rules
Step 1: Connect
To charge your scooter first, you have to connect your jumper to the battery. You have to connect the red wire for a positive port, and the black wire is for a negative port. When connecting the battery, Make sure that there is no leak or breaks. Otherwise, it can be dangerous.
Step 2: Turn the Jumper On
Then Switch on the jumper. To charge the battery fully, you have to charge it for 20 minutes. When charging, don’t disconnect the jumper from a battery. Otherwise, it can damage your battery and also a subject of electric shocks.
Step 3: Disconnect the Jumper
You have to disconnect the jumper when the battery is full. You have to do this by unplugging the negative port from the jumper. And by plugging the positive port with the battery, your electric scooter is ready to go.
Using a Universal Power Adapter
It is an electronic device that can store up electrical charge for some time. It is the best electric device than any other electronics of its kind. By using this technique, you can charge your electric scooter without a charger. You have to follow the process:
Step 1: Plug your Power Cable to Adapter
An adapter is a kind of equipment that can charge all kinds of electric devices. You have to connect black wire for negative port and red wire for a positive port.
Step 2: Set the voltage
Now you have to install the voltage at 4.20V/cell for restoring. Since you do not know what quantity of the battery comes in your scooter, you have to pick it or communicate the company.
Step 3: Set the current
Include your battery range and set the power to 20%. For example, if the battery is at 9Ah, the output current will be 1.8A. So as, if the battery is 9Ah, then the flexible energy source will be 1.8A. But too much charge may be dangerous to your battery.
Step 4: Wait for the charge
The battery displays full by dropping the provided current. When provided current is about 3% of the scooter battery’s rated range (Ah), then divide the Universal Power Adapter. And your scooter is available.
Charging the Several Batteries
Normally, there are three kinds of batteries used in the scooters, which are lead-acid batteries, Lithium-ion batteries, NiCD/NiMH batteries. Here below, we will explain how to charge your bike based on the battery.
Lead Acid Scooter Batteries
Further, then 140 years this Lead Acid Scooter Batteries has been done in many electronic devices. Because of higher strength, low price, and understanding of overcharging it is very common in scooters.
If you require to charge a lead-acid scooter battery First, you have to estimate the voltage by limiting the number of cells in the battery. After estimating energy now charge battery by using a shifting charger. Divide the charger when the battery is full.
NiCd& NiMH Battery
NiCd and NiMH are two various types of battery, but their purpose is related. By using chemical responses these both batteries collect service to power the bike. They are great for energy volume and saving power range.
It is difficult to know the charge of this battery first then the other batteries. The battery charge is known only when the temperature is increasing. If you see the temperature rise 0.3 – 1C, then it shows the battery is full. To charge an empty 2Ah NiMH battery at 750-1000mA, It takes around 3 hours.
Lithium-Ion Batteries
Today most preferred and used the battery in modern electrical devices is Lithium-ion Batteries. Lithium-ion batteries are highly flexible, power saving, produce less heat, and low price all over the world.
Before charging always learn Full voltage charge, which is 4.20V/cell. You also have to make sure that the power supply and voltage don’t exceed 4.20V/cell. When the power supply fall in 3 percent of the rated current and the charge reaches the 4.20V/cell voltage, your battery is full. And your scooter is ready to go.
To Wrap Up
Soon I think you can get the whole idea of how to charge a scooter battery without a charger. But following these rules, as I explained above, you can fast-charge scooter without a charger at home. As it is a highly complicated process, I suggested you be extra careful or take the help of a mechanic.
Tips for a Better Battery Life of the Scooter
Scooter’s batteries are created to give you around 300 to 400 charging and discharging. That indicates you can use the batteries for round two to three years. But, if you take decent care of the scooter, then you may use the scooter for much great. Whether it is a scooter for kids or an adult scooter, following the under points will help you to get better and long-lasting achievement from your scooter’s battery.
Regularly charge the batteries of the scooter. It is a good system to charge the scooter behind every drive. It doesn’t value whether you have a long-distance ride or a short drive, charging after the ride will maximize the lifespan of the bike.
- If you are preparing to store the scooter, then disconnect the batteries and then store them. Further, fill the batteries once in three months to reduce any chance of oxidation.
- Extreme hot or cold temperature is destructive for the scooter battery. So withdraw storing the scooter in very cold or humid conditions. Also, avoid storing the set in metal or concrete covers as they are conductive and capable of removing the battery much quicker.
- Never leave your battery partly charged for a couple of hours. It will reduce the battery life within a short time. Load the batteries fully all the time.
- Make assured the battery is not cheating. Typically, when you fill the battery with the charger that you receive from the company, you will not need to understand this rule. But, when using the shifting charger, you should be concerned about the full charge and follow the above points to indicate the full charge.
Conclusion
That is how to charge a scooter battery without a charger and the step by step process of using a car jumper to provide the charge to your scooter battery. Make sure to wear protective gear like rubber gloves and goggles to protect yourself from anything that may go wrong. Once you get your scooter battery fully charged, your scooter will be roadworthy ready to take on long-distance drives with smooth performance.
