Do you want to learn How to ride a dirt bike with clutch? then you are in the right place. We at BestComfortBike will give you the guide on How to ride a dirt bike with clutch? It can be quite intimidating particularly if you are different from motorcycles controls in common. Before hopping on a bike that is not an “automatic”, meaning just turning the throttle, we need to be assured you have a concept of what you are dealing with. Understanding how the gearbox works, what the clutch performs, where the brakes are, and identifying when to shift (etc.) will put you on a successful path to discovering how to accurately handle your dirt bike. We will go over what you should do before getting on your dirt bike.
Table of Contents
Guide: How to Ride A Dirt Bike With Clutch?
Step 1: Learning the controls
Being simple where your controls are should be one of the principal points you learn before even turning on your bike. You never need to turn the bike on and simply hit the throttle when you do not know where the brakes are. Identify where the gear shifter is placed on the left side near the footpeg, the clutch is placed on the left side of the handlebars, the throttle is on the right side of the handlebars, the front brake is on the right side of handlebars over the throttle, and the rear brake is the right side near the other footpeg. Remember one thing do not just get on a bike if you are unknown with the controls!
Step 2: How To Use the clutch
The clutch is the role of your bike that releases the power from the engine to the gears. You will use your clutch when attempting to shift gears or when you require to make your dirt bike to a stop therefore that your engine does not stall when it is not in gear. To use the clutch you will lack to pull the clutch lever continuously it touches the handlebar. The clutch will feel more comfortable to pull in. Do not be too hard on yourself if your bike stalls a lot when you are first learning.
Step 3: Shifting and Braking
Some amateur cyclists believe that you require to pull in the clutch every time you press the brake but you just need to do so if you are switching gears or proceeding to a full stop. If you press the brake in so that you slow down and you are going to slow for the chosen gear, you may require to shift down to a lower gear. Your front brake should not perceive anything like your clutch it should be tighter. Feel free to relate them so you know the variation.
Step 4: How to Shift Gears On A Dirt Bike
Start in open-minded, take off, and place yourself in the front gear you will continue in the clutch and push down on the gear shift with your left foot. Then loosen the clutch a little bit till you start to roll and that is when you will give it some throttle. Once you begin to catch more extra speed you pull the clutch in again and push up with your left foot into second gear, then third, then fourth, etc. You will have to get the sweet spot of the clutch to shift easily otherwise your trip can be very jerky.
Step 5: Practice
Before attempting to learn jumps, tricks, etc, you lack to master the clutch and shifting gears. We do not suggest practice on a motocross trail but rather a clear area similar to a straight, off-road lane is an excellent area to ride up and down on. Training in an area with no disturbances will enable you to get lots of practice and you will get to focus on accurately using the clutch. There are additionally semi-automatic delivery dirt bikes that you could learn to ride before even learning about shifting gears or using a clutch.
Step 6: Get on and Ride!
Once you are satisfied with the idea of the clutch works, the gearbox at your left foot shifts by the gears, and where everything is you should feel much more convinced than when you began. Training makes excellent learning the controls of a motorcycle therefore be assured you set apart time to get the repetition in. After that, it should feel like second nature to you!
